
	"GREEN" Products (Eco-Friendly)
	Glazes
	Spray Lacquers & Sealers
	Stains, Dyes & Pigments
	Surface Preparation & Supplies
	Masking Tapes, Paper & Films
	Catalyzed (Post) Coatings
	Brush/Hand Applied Finishes Interior/Exterior
	Sandpaper & Other Abrasives
	Wax, Polishes & Cleaners
	Spray Equipment & Safety Supplies
	Brushes, Rollers, Applicators
	Removers & Amalgamators
	Touch Up Wood & Leather
	Gilding & Faux
	Veneers & Adhesives
	Tools & Hardware
	Paints
	Solvents: Reducers, Retarders, Thinners

Touch Up Wood & Leather

Aerosols

	BLOCK IT TONER BLUE	more info
	Manufacturer: Mohawk
	Adjust color shades without having to strip and refinish. Block-It™ toners will warm up or cool down the color of a finish. Use orange to warm up or neutralize green shade browns. Use Blue or Green to neutralize red. Obtain browns by spraying Blue over Red. Green will cool down or neutralize a finish that is too red. Apply directly over existing finish.
	Also available: BLOCK IT TONER BLUE - Call Us BLOCK IT TONER GREEN - Call Us BLOCK IT TONER ORANGE - Call Us BLOCK IT TONER TRANSPARENT ORANGE - Call Us

	VINYL FINISH AEROSOLS CLEAR Vinyl Finish Aerosols are used to apply a clear, flexible and durable c	more info
	Manufacturer: Mohawk
	Vinyl Finish Aerosols are used to apply a clear, flexible and durable coating to protect and blend in spot repairs on vinyl and pigmented leather. Most often, their application on pigmented leathers is as a topcoat over two-tone finishes, especially when Touch Up Aniline has been used over Touch Up Pigment. Available in three sheens
	Also available: VINYL FINISH AEROSOL CLEAR GLOSS - Call Us VINYL FINISH AEROSOL CLEAR SATIN - Call Us VINYL FINISH AEROSOL CLEAR FLAT - Call Us

	MOHAWK FINISHERS GLAZE GLAZING STAIN AEROSOLSA truly professional glaze in an aerosol. No lid to op	more info
	Manufacturer: Mohawk
	A truly professional glaze in an aerosol. No lid to open. No messy stir stick. No spills. No messy applicator. Just shake and spray. This is a medium viscosity glaze formulated in the spirit of our Finisher's Glaze™ Glazing Stain to yield great workability, and yet the solvent system is so coatings compatible that you can topcoat within just minutes. The high pigment load assures the opacity you need for great coverage. Use this glaze for quick and easy touch-ups, finishing applications, refinishing, and expedient application on carvings and into corners. In short, use it for anything you can do with a bulk glaze--only faster.
	Also available: FINISHERS GLAZE GLAZING STAIN AEROSOL RAW UMBER - Call Us FINISHERS GLAZE GLAZING STAIN AEROSOL WHITE - Call Us FINISHERS GLAZE GLAZING STAIN AEROSOL BLACK - Call Us FINISHERS GLAZE GLAZING STAIN AEROSOL DEEP MAHOGANY - Call Us FINISHERS GLAZE GLAZING STAIN AEROSOL BURNT UMBER - Call Us FINISHERS GLAZE GLAZING STAIN AEROSOL VAN DYKE BROWN - Call Us