Abbot Paint: Manufacturers


	"GREEN" Products (Eco-Friendly)
	Glazes
	Spray Lacquers & Sealers
	Stains, Dyes & Pigments
	Surface Preparation & Supplies
	Masking Tapes, Paper & Films
	Catalyzed (Post) Coatings
	Brush/Hand Applied Finishes Interior/Exterior
	Sandpaper & Other Abrasives
	Wax, Polishes & Cleaners
	Spray Equipment & Safety Supplies
	Brushes, Rollers, Applicators
	Removers & Amalgamators
	Touch Up Wood & Leather
	Gilding & Faux
	Veneers & Adhesives
	Tools & Hardware
	Paints
	Solvents: Reducers, Retarders, Thinners

	SOLID BIRCH HARDWOOD DOWELS. MADE IN THE U.S.AThese Dowels are fully dimentional and American made.	more info
	Manufacturer: Starborn
	SOLID BIRCH HARDWOOD DOWELS. MADE IN THE U.S.A These Dowels are fully dimentional and American made. The imports carried by most other suppliers are of tropical wood, usually ramin, and are not full thickness because they are produced to metric specifications.
	Also available:

	VENEER EDGE WOOD BANDSREAL WOOD, HOT MELT, PRE GLUED, IRON	more info
	Manufacturer: Starborn
	REAL WOOD, HOT MELT, PRE GLUED, IRON ON Coordinated edge banding is precoated with a heat-activated glue for a permanent bond.
	Also available:

	Decks have undergone an evolution in recent years, from being part of the backyard to part of a home	more info
	Manufacturer: Starborn
	Decks have undergone an evolution in recent years, from being part of the backyard to part of a home's primary living space. Along with this change has come the expanded use of stainless steel deck screws, recognized as the fastener of choice to protect the investment represented by today's decks. Stainless steel, however, is softer than hardened steel and often requires pre-drilling with preferred decking materials like composites and hardwoods. Up until now pre-drilling has been time consuming and laborious, but with SMART-BIT® pre-drilling and countersinking can be done in one step, with one tool, more quickly and more easily than ever before. Anyone who has ever used older pre-drilling and countersinking methods will be amazed by the time-savings that SMART-BIT® provides. For deck builders working with composites, SMART-BIT® offers an additional benefit -- it eliminates mushrooming (the formation of small mounds of waste material near the screw hole surface). SMART-BIT® understands the need and the importance of pre-drilling. For the first time, the deck fastener and the pre-drilling tool are recognized as the single system they are. Simply match the correct SMART-BIT® size to the deck screw size you want to use and you are ready to go! The SMART-BIT®/HEADCOTE® System SMART-BIT® creates a perfect hole and fit for HEADCOTE® color coated stainless steel deck screws. Working together, SMART-BIT® and HEADCOTE® can quickly and easily create a professional finish that will noticeably enhance the overall appearance of any deck. For all types of decking, the SMART-BIT®/HEADCOTE® System is the ultimate method of deck installation SMART-BIT® is packed two bits per blister card and comes in three sizes: #7 Trim Head (Item #BDA130) #8 Trim Head (Item #BDA131) #10 Flat Head (Item #BDA136) Overall Length SMART-BIT® makes a hole 1-1/8" deep, including the depth of the countersink. It is general practice not to pre-drill the underlying (joist) material, as this is usually treated lumber and does not require pre-drilling. SMART-BIT® provides sufficient depth for installing deck lumber up to 5/4" nominal size.
	Also available: SMART-BIT #7 Trim Head SMART-BIT #8 Trim Head SMART-BIT #10 Flat Head

	VENEER EDGE WOOD BANDSREAL WOOD, HOT MELT, PRE GLUED, IRON	more info
	Manufacturer: Starborn
	REAL WOOD, HOT MELT, PRE GLUED, IRON ON Coordinated edge banding is precoated with a heat-activated glue for a permanent bond.
	Also available: VENEER EDGING WOOD BAND MAHOGONY13/16"x250 FEET VENEER EDGING WOOD BAND MAPLE 13/16"x250 FEET VENEER EDGING WOOD BAND RED OAK 13/16"x250 FEET VENEER EDGING WOOD BAND WALNUT 13/16"x250 FEET VENEER EDGING WOOD BAND WHITE BIRCH 13/16"x250 FEET VENEER EDGING WOOD BAND WHITE OAK 13/16"x250 FEET VENEER EDGING WOOD BAND CHERRY 13/16"x250 FEET

SOLID BIRCH HARDWOOD DOWELS. MADE IN THE U.S.AThese Dowels are fully dimentional and American made.

Joining Biscuits Used for reinforcing all types of wood joints. Biscuits will fit slots made by any

Joining Biscuits #0 5/8"x 1-3/4" Pack of 50

1 1/4" Solid Birch Harwood Dowel

VENEER EDGE WOOD BANDSREAL WOOD, HOT MELT, PRE GLUED, IRON

Decks have undergone an evolution in recent years, from being part of the backyard to part of a home

Joining Biscuits Used for reinforcing all types of wood joints. Biscuits will fit slots made by any

VENEER EDGE WOOD BANDSREAL WOOD, HOT MELT, PRE GLUED, IRON